Creating A 3CX User

Creating A 3CX User

1. Login to your management console.


2. Click on Users on the left-hand side.
3. Click on Add
4. Fill out your user's extension number and contact information


    • Related Articles

    • Configure Remote User Access using OpenVPN

      Introduction Besides being able to use PPTP and L2TP with IPsec you can now also use OpenVPN for Remote User Access to your LAN. This article describes how to configure your Peplink router and a Windows 10 client for remote User Access using OpenVPN. ...
    • Creating IPSEC on Peplink

      1.  Login to your Peplink device, either via public IP access or inControl. 2. Click on Network -> Than on the left side "IPsec VPN" -> Than click "New Profile"   3. Fill out the information based on the VPN configuration that Telin provided for your ...
    • Creating an IPSEC on fortigate

      1. Login to the FortiGate and go to  VPN -> IPsec Tunnels, then select "Create New" 2. Start off using the Site-to-Site configuration, this will automatically create Static Routes and Policys for you. 3. Enter the IP address of your Telin hosted PBX. ...
    • Creating a Customer Account on the Telin One.Console

      Your first step to gaining functionality for purchasing trunks, licenses, servers and numbers for you and your customers on the Telin One.Console is to create an account! Below we will outline this easy-to-use process as well as go over some of the ...
    • Purchasing a DID on the Telin One.Console

      Purchasing and provisioning a DID on the Telin One.Console is designed to be an easy, and user friendly process with features such as search functionality by a number of criteria and provisioning ability all in one place! Below is a step-by-step ...