How to Add a New User to Telin One
1. Navigate to https://console.telin.one/
2. Click "Manage Users"
3. Click "Add User"
4. Fill in the "User Name" field.
5. Fill in the "First Name" field.
6. Fill in the "Last Name" field.
7. Fill in the "User Email" field.
8. Fill in the "Password" field.
9. Fill in the "Repeat Password" field.
10. Toggle "Is Approved"
11. Fill in the "User Phone" field.
12. Click "Create User"
Related Articles
One Fax- Branding and Domain Setup
Branding and Domain Setup This article will demonstrate how to set up your branding page and domains. First, click your initials in the bottom left part of the screen, then click branding. The customization tab allows you to add email addresses that ...Configure Remote User Access using OpenVPN
Introduction Besides being able to use PPTP and L2TP with IPsec you can now also use OpenVPN for Remote User Access to your LAN. This article describes how to configure your Peplink router and a Windows 10 client for remote User Access using OpenVPN. ...SNOM Phone Mass Reset VIA HTTP Post
1. Create a .ps1 file using the script below 2. Create a CSV file where cells in column A each contain the IP addresses of Snom phones on your network(ex. A1=192.168.1.50, A2=192.168.1.51,...). It shouldn't cause any issues if you include IPs that ...Creating IPSEC on Peplink
1. Login to your Peplink device, either via public IP access or inControl. 2. Click on Network -> Than on the left side "IPsec VPN" -> Than click "New Profile" 3. Fill out the information based on the VPN configuration that Telin provided for your ...Network Topology Sample
Please download the following network map and fill out for your One.Demarc install and send to support@telin.com.