Networking
Configure Remote User Access using OpenVPN
Introduction Besides being able to use PPTP and L2TP with IPsec you can now also use OpenVPN for Remote User Access to your LAN. This article describes how to configure your Peplink router and a Windows 10 client for remote User Access using OpenVPN. ...
Network Topology Sample
Please download the following network map and fill out for your One.Demarc install and send to support@telin.com.
SNOM Phone Mass Reset VIA HTTP Post
1. Create a .ps1 file using the script below 2. Create a CSV file where cells in column A each contain the IP addresses of Snom phones on your network(ex. A1=192.168.1.50, A2=192.168.1.51,...). It shouldn't cause any issues if you include IPs that ...
Creating IPSEC on Peplink
1. Login to your Peplink device, either via public IP access or inControl. 2. Click on Network -> Than on the left side "IPsec VPN" -> Than click "New Profile" 3. Fill out the information based on the VPN configuration that Telin provided for your ...
Creating an IPSEC on fortigate
1. Login to the FortiGate and go to VPN -> IPsec Tunnels, then select "Create New" 2. Start off using the Site-to-Site configuration, this will automatically create Static Routes and Policys for you. 3. Enter the IP address of your Telin hosted PBX. ...